This is complete stack and stitch system. It comes with complete control modules for camera, X, Y and Z control modules. The X and Y axis are built with our standard rails SR90 and the stacking axis, the Z axis is built with a used industrial rail (see Ultra rail) that provide the most stable operation. This setup is suitable for 3x magnification and under.


3x motor control module for X, Y and Z axis

1x Camera control module

4x 1m long RJ45 Category 5 (or 6) cables

3x 12V 5A power supplies for each rail

2x SR-90 standard rails

1x PR-80 precisiion rail for stacking axis

2x 330mm long silver 8020 aluminum T-slot boards

2x 330mm long black matte finish 8020 aluminum T-slot boards

4x aluminum joint plates with five 5mm holes

4x aluminum right angled brackets with two 5mm holes

2x aluminum right angle joint plates with five 5mm holes

1x specimen holder

1x vertical mounting bar with 4 M3x18 mounting screws and washers

All necessary bolts and screws


Important Note: To successfully stitching stacked images, the lens used must be near telecentric


Here are some of works done using this system.

Stack and Stitch System with Precision Stacking Rail



    • w-facebook
    • White Google+ Icon
    • Twitter Clean